Air Lift Air Shock Controller Compressor System for Air Shock Absorbers - 160 psi
(29 reviews)
Price: $214.16
In Stock
Air Lift Air Shock Controller Compressor System for Air Shock Absorbers - 160 psi
Item # AL25804
Retail:$442.93
Our Price: $214.16
You Save: $228.77
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (29)
- Q & A (0)
- Videos (1)
- Photos
Air Lift Air Suspension Compressor Kit - AL25804
- Wired Control
- Single Path
- Air Lift
- 160 psi
- Analog Display
With an onboard air compressor and a single-gauge dash panel, this system lets you control the air pressure in your shock absorbers without leaving the driver's seat. The universal fittings connect to most aftermarket and factory shocks.
Features:
- Lets you monitor and automatically adjust the air pressure in your shock absorbers from the driver's seat
- Comes with universal connector that fits most factory and aftermarket air shocks
- Includes onboard air compressor, single-gauge dash panel, air lines and hardware
- Maximum air pressure: 160 psi
- Made in the USA
- 2-Year limited warranty
25804 Airlift 160 psi Air Shock Controller
Installation Details
California residents: click here
Video of Air Lift Air Shock Controller Compressor System for Air Shock Absorbers - 160 psi
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Air Lift Air Suspension Compressor Kit - Air Shock Controller Compressor System - AL25804
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a look at this Air Lift Air Shock Controller compressor system for air shock absorbers. Now, this system is going to let you monitor and automatically adjust the air pressure in your shock absorbers with this onboard compressor that you see here in my hands and this single gauge dash panel without leaving your driver's seat. Now, this is gonna come with universal fittings that will connect to most aftermarket and factory air shocks. And it includes everything that you see here in front of me.
You're gonna get this onboard compressor. And then you are gonna get this single gauge dash panel. And you're gonna have a switch here to inflate your air shocks. You just push and hold to inflate. Then you also have a button here to deflate your air shocks, this silver one right here.
And you are gonna get air lines, and you're also gonna get the hardware that you are going to need, and set of instructions for your compressor and for the installation of the rest of your system. And this does have a maximum air pressure of 160 psi. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me..
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Air Lift Air Shock Controller Compressor System for Air Shock Absorbers - 160 psi - AL25804
Average Customer Rating: 4.5 out of 5 stars (29 Customer Reviews)
With an onboard air compressor and a single-gauge dash panel, this system lets you control the air pressure in your shock absorbers without leaving the driver's seat. The universal fittings connect to most aftermarket and factory shocks.by: James05/30/2018
For the money, this set-up is hard to beat.
I installed it on my 2002 Toyota Tundra TRD 4x4 along with a set of Firestone Ride-Rite airbags to aid in leveling out the truck when pulling large trailers.
I ran into some issues installing the supplied gauge panel- in the tundra there is litterally no place to mount the panel aside from the dash pocket on the driver side. Unfortunately, this pocket houses my electric brake controller as I like it close by in case I need to manually override the brakes by the lever on the unit.
My solution was to remove the lower, center dash panel and cut the holes to house the gauges.
This proved to be no simple task as the srs airbag pcm is located right behind this panel- i had to trim the pcm mount, elongate the mounting holes in effort to slide the srs pcm back enough to allow clearance for the gauge. I also ended up using an angled trim from auto meter to aid in this as well.
When wiring the lights for the gauge i tapped into one of the illuminated trim rings for the factory power outlets- this allows the gauge illumination to only come on when the headlights are turned on.
I decided to mount the actual compressor under the center of the bed on a support rail using a custom bracket made of 1/8" steel plate as there is really not much room for it in the cabin and my storage cubbys under the seat are already full.
The only downside to this compressor is that it takes a good while to reach 100 psi on the gauge. This is why I rated 4 stars instead of 5- Im sure the addition of an air tank would help tremendously.
FYI- Fastenal carries the proper push fittings for 1/4" air lines- i needed two extra tee's (about $20 for both) as i wanted schrader valves to remotely fill it if the compressor decided to give up the ghost.
by: Jeff03/05/2024
Fantastic information and service, very satisfied
by: Lee 07/20/2023
I'm very happy with my purchase. I have it on my 05 Titan and I pull a dump trailer that I've hauled 6 ton on ,I air up my bags to 45 lbs while I'm hauling then push the button and air down to 10lbs with no issues.
by: Jeremy05/28/2018
Easy install great service amazing product. I pull a 5th wheel and haul ATV and sled in the box pulled bobcats this setup has made awesome improvements to the ride and handling of my 14 5.5 box quad cab f150 thanks etrailer
by: Dean 08/05/2023
It seems like a great product but I have to get some different fitting s to hook to shocks when I get time to put it on I will send pictures and reviews
by: Chris01/26/2019
Very easy install!! Haven’t played with it much but pic attached is only 80psi to 20 psi!
by: Kerry 07/13/2022
The onboard compressor works as advertised! It makes load leveling a snap when carrying a heavy load or pulling the 20’ trailer. This was a great purchase!
by: Paul11/12/2021
Very excited that it shipped before the projected date. And arrived early. However, it was the wrong part. I ordered the 160 pound compressor. I received the 100 pound compressor. Pity. The info and manuals were fir the 160 pound compressor. But, the compressor was not. Drew, customer service, appears competent and certainly apologetic. He assured me it would be resolved soon. We’ll see
by: G Scott07/26/2018
Still working fine no leaks even. Compressor is hidden behind a wall panel. The switch and gague are near the trunk release on the dash.
It solved the loading problem for my Buckeye Tailgate vehical.
by: Sam 08/17/2022
Works great, leveled my truck up great
by: Mike 10/28/2020
Easy to replace the air compressor. Order was received promptly and the website was very easy to maneuver.
by: Polk03/03/2023
The sale associates were veery helpful & answered all my questions. I'll be back!
by: Jose 11/21/2021
Excelent product , and easy to install, thanks!!
by: Ben08/17/2021
Great customer service as always! Will do business again!!
by: Theodore 08/27/2021
Works very well
by: Chris01/25/2019
Very easy install!! Haven’t played with it much but link attached is only 80psi to 20 psi!!
by: Joseph 04/23/2024
by: Shannon 11/02/2020
Works like it says.
by: Chuck01/08/2024
by: Hayes03/11/2024
by: Richard09/28/2022
by: Thomas 09/07/2022
by: Steve 07/03/2023
by: Dennis 04/29/2023
by: Sam02/03/2023
25
29
Show More Reviews
See what our Experts say about this Air Lift Air Suspension Compressor Kit
- Will the Air Lift Air Shock Controller Compressor System Work with Air Lift 5000 Air Bags?Yes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88399 will work with the Air Lift Air Shock Controller Compressor System for Air Shock Absorbers # AL25804.
view full answer... - Air Compressor Kit That Allows Front and Rear Air Bags to be Set for Different PressuresThe Air Lift Air Shock Controller Compressor System for Air Shock Absorbers # AL25804 that you referenced only has the capability to maintain one pressure so you need the Air Lift Load Controller I Compressor System # AL25651 instead. This is a dual path system so you'll fit one path to the front air bags and one path to the rear air bags for your front-to-back leveling.
view full answer... - Recommended Firestone Air Springs for 2012 Toyota Tacoma PrerunnerThe Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2407 is a confirmed fit for your 2012 Toyota Tacoma Prerunner. There is no modification needed for this application. You may want to consider adding an onboard air compressor so you can adjust your springs as desired, and I recommend the Air Lift Air Shock Controller Compressor System for Air Shock Absorbers - 160 psi # AL25804 for your application.
view full answer... - Can The Air Lift Shock Controller Compressor System Inflate A Tire The Air Lift Air Shock Controller Compressor System for Air Shock Absorbers # AL25804 has a 160psi rating so it would be more than capable of airing up a tire, but the connectors are different than what would be needed to connect to a tire valve stem. To air up a tire on the go you would want to use a tire inflator like the Viair TLC PLUS Portable Air Compressor # VA67WR. I've attached a short video below where AJ will review the compressor and walk you through usage.
view full answer... - Availability of Air Lift LoadLifter and Gooseneck Hitch Fit on a 1995 Ford F-350The Air Lift LoadLifter 5000 # AL88298 is designed to fit a pickup that already has 5th wheel brackets installed on it. I know you have a gooseneck hitch on your 1995 Ford F-350 but typically the way 5th wheel brackets and gooseneck brackets install are very similar so you should be okay. If you check out the linked installation instructions you can compare the installation process to what you have. Please note that you will likely need to drill into the bracket of the Air Lift spring. If...
view full answer... - Air Lift Compressor Recommendation to Use with Air Lift 1000 Air BagsWe have a great solution for you, but the Air Lift Compressor part # AL25804 is for air shocks and not air bags. For a similar setup designed for air bags you'd want the Air Lift Load Controller II Compressor System # AL25592 which gives you a gauge that mounts on the interior of the vehicle that allows you to easily monitor the bag pressure and inflate/deflate as needed.
view full answer... - Recommended Air Lift LoadLifter 5000 Springs and Spacers for 2005 Silverado 2500 with 5-1/2" BlocksOn your 2005 Chevy Silverado 2500, the Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57275 are a great fit and will require spacers for the lift blocks you have installed. I recommend the Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL - 6" Lift - Qty 2 # AL52460 which will allow your springs to have the space needed for function as well as the height needed to fit your 5-1/2 inch lift blocks. You can still use the manual Schrader valves included in...
view full answer... - Air Lift Air Bag Kit Fitment for a 2014 Nissan XterraThe only Air Lift kit that fits your 2014 Nissan Xterra is their Ride Control: - Air Lift Ride Control Air Helper Springs # AL59562 This is a little different than the 1000 you're asking about but it essentially operates the same. It's designed for a 4-wheel drive and can help with up to 2,000 lbs as well. If you plan on using the air bags fairly frequently I also recommend picking up the Air Lift Air Shock Controller Compressor System # AL25804 so you can monitor and adjust the air...
view full answer... - Recommended Air Springs for 2018 Toyota 4Runner TRD Off RoadThe Firestone Coil-Rite Air Helper Springs - Rear Axle # F4135 is the correct fit for your 2018 Toyota 4Runner TRD Off Road. Air Lift brand doesn't have a confirmed fit at this time for your vehicle, so I recommend using the Firestone brand. This air spring will fit inside the coil springs to provide additional support. If you want to utilize a compressor system to adjust the air in your springs I recommend using the Air Lift Air Shock Controller Compressor System for Air Shock Absorbers...
view full answer... - Recommended Air Spring Suspension for 2012 Chevy 3500 for Better Ride QualityFor your 2012 Chevy 3500 I recommend the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2613. This will give you adjustability to control the ride quality. I recommend the Air Lift Air Shock Controller Compressor System for Air Shock Absorbers - 160 psi # AL25804 to give you adjustability at any time for the best ride quality.
view full answer... - Can Air Lift 5000 Air Springs for 2020 Ram 1500 Be Connected TogetherYes. The Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57375 can use the Air Lift Union T-Piece for 1/4" Air Lines # AL21838 to connect the two air springs allowing you to use either a single valve stem (Schrader valve) for manual inflation or to use a single path air compressor like the Air Lift Air Shock Controller Compressor System for Air Shock Absorbers - 160 psi # AL25804. This will inflate both air springs with equal psi.
view full answer... - Tilt Trailer Positioning and Softer Landing For Snowmobiles and ATV'sWe don't have a kit, but I do have an idea of how to help. I recommend using the Firestone Ride-Rite LS Rear Shock Absorbers # F4351 that are controlled by air for desired movement to hold your tilt and support the weight of the snowmobile or ATV. I recommend the Air Lift Air Shock Controller Compressor System for Air Shock Absorbers - 160 psi # AL25804 to set your levels and ease the tilt down when loaded for a far less jarring experience. This will allow you to set the air for the...
view full answer... - Can the Air Lift Air Shock Controller Compressor System AL25804 Be Used With Air Bag Helper Springs?I recommend using the Air Lift Load Controller II Compressor System # AL25592 with the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88229 on your 2016 Nissan Titan XD. This compressor system is designed to be used with the air helper springs. The Air Lift Air Shock Controller Compressor System for Air Shock Absorbers # AL25804 you found is specifically designed to be used with air shocks. If you were to use the kit designed for air shocks which have a much smaller area to fill...
view full answer... - Recommended Air Spring and Compressor for 2019 Ram 1500 Classic Bighorn EditionThe Air Lift AirLift 1000 Air Helper Springs for Coil Springs - Rear # AL60818 is a fit for your 2019 Ram 1500 Classic Bighorn. Then to add a compressor, I recommend using the Air Lift Air Shock Controller Compressor System for Air Shock Absorbers - 160 psi # AL25804 which gives you the in cab adjustment you mentioned.
view full answer... - Which Air Lift Compressor Kit for 2017 Chevy Silverado with Monroe AirMax ShocksYou'll want to use the Air Lift Air Shock Controller Compressor System for Air Shock Absorbers - 160 psi # AL25804 since these are designed to work with aftermarket air shocks like your Monroe Air Max. This is a single path system, so the shocks will receive the same amount of air pressure, and comes with an analog gauge that can be placed in the truck so you can monitor your pressure. The AirLift # AL25592 is designed to use with an air bag/spring system and not your Monroe AirMax.
view full answer... - Air Bag Kit Recommendation for a 2000 Ford F-250 with Curt Gooseneck Hitch InstalledThe air bag kit I recommend for your 2000 Ford F-250 is the Firestone Ride-Rite Air Helper Springs # F2550 because they are compatible with your Curt gooseneck hitch and they are more durable than other air bags due to the double-convoluted constructions and the rolled crimp seal that connects the air bags to the end plates. I usually recommend picking up an air compressor kit with air bags as well since it gives you the ability to monitor and adjust your air bags on the go. The Air Lift...
view full answer... - Air Lift Air Shock Compressor Kit Fitment with 2017 Chevy Silverado 2500The Air Lift Air Shock Controller Compressor System for Air Shock Absorbers # AL25804 will work with aftermarket air bag kits for your 2017 Chevy Silverado 2500. If you're asking about it working in the place of an OEM air bag kit it's possible, but just understand that it might not operate the exact same as an OEM compressor system would.
view full answer... - Can Air Lift Compressor AL25804 Fill Air Bags to 60 PSIThe Air Lift compressor part # AL25804 that you referenced is capable of a max air pressure of 160 psi so it would easily fill your air bags to 60 psi.
view full answer... - What Does the Silver Button on Gauge Cluster of Air Lift Compressor DoYes, the silver button you see to the right of the gauge on the Air Lift Compressor part # AL25804 is used for releasing the air pressure in the air bags.
view full answer...
- Difference Between Air Lift Compressor Kit AL25804 and AL25592The difference between the Air Lift Air Shock Controller Compressor System # AL25804 and the Air Lift Load Controller II Compressor System # AL25592 is that the 25804 is the standard compressor system where the 25592 is the upgraded version that has a better gauge with an LED backlight and extra parts so you can also inflate/deflate your air bags manually if you choose to. Aside from those couple of things they have the same compressor system and are single path operation which means that...
view full answer... - What Adapter Do I Need To Use Airlift Air Shock Controller System With Monroe ShocksThe Air Lift Air Shock Controller Compressor System for Air Shock Absorbers part # AL25804 uses 1/4" lines and does not include the adapter for the 1/8" Monroe air shocks. You will need a 37 Degree JIC female swivel to 1/4" female pipe adapter according to my research. The Air Lift Air Shock Controller is a great choice for aftermarket/factory air shocks and has a maximum air pressure of 160 PSI.
view full answer... - Firestone Air Bag Kit for a 2020 Jeep GladiatorThere is an air bag kit for your 2020 Jeep Gladiator from Firestone with their Coil-Rite kit # F29ZR. This kit fits both the 2WD and 4WD versions of your vehicle and it installs inside the coil springs so it's a little different than your standard air bag kit but it's still effective. I've attached an installation video as well as a photo of this kit on a 2020 Gladiator for you to reference. I like to recommend an air compressor with any air bag kit because it allows you to monitor and...
view full answer...
- Recommended Rear Suspension Helper Springs For 2018 Chevy 2500 With 6 Inch LiftFor your 2018 Chevy 2500 you will want the Timbren Rear Suspension Enhancement System # TGMRCK25D and you will need to add a block of some sort to the jounce plate on the axle to account for your lift because spacers can't be added to the top of the jounce on your particular vehicle due to the jounce stop cup. A better option and my recommendation for your 6 inch lifted truck is to use an air ride system like the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle...
view full answer... - Suspension Enhancement Recommendation for a 2WD 2022 Toyota TundraBoth Air Lift LoadLifter 5000 Ultimate Air Helper Springs, part # AL84JQ for normal springs or part # AL24JQ for internal jounce bumpers, will fit the 2WD and the 4WD versions of the 2022 Toyota Tundra so you're good to go! I always recommend picking up an air compressor kit as well so that you can monitor and adjust your air bags on an as-needed basis. For your application we have the Air Lift Air Shock Controller Compressor System # AL25804 which I really like because the air compressor...
view full answer...
Do you have a question about this Air Suspension Compressor Kit?
Info for this part was:
Updated by:
Leah B
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Michael B
Expert Research:
Jameson C
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
11/15/2021
I will have our customer service team reach out to you to follow up.